There are many different kinds of workplaces where eye and face wash stations are a mandatory requirement, according to Workplace Health Safety (WHS) laws and regulations. If you are at all unsure as to whether you should have them installed in your premises, the best thing to do is to consult a health and safety specialist. If your employees use, or come into contact with, any of the following on a regular basis, they should definitely have access to fully functioning face and eyewash units at all times:
Mechanical Equipment That Produces Fast-Moving Small Particles – Grinding and polishing machines that are designed to create a smooth surface on metals, gemstones or other hard materials will naturally produce a large number of extremely small particles that fly through the air. Operators of such machines should of course wear protective eye equipment at all times but there should also be WHS compliant eye and face wash stations in close proximity to the machines that they use.
Potentially Hazardous Chemicals – Employees who handle hazardous substances in the workplace must be provided with emergency eye and face wash stations, for obvious reasons. Both acidic and alkaline chemical solutions have the potential to cause severe damage to the human eye so it is vital to ensure that anybody working with such chemicals has all the protection they need. Protective face and eye equipment must always be worn when dealing with substances that can cause serious injuries and automatic face and eye shower stations should be strategically located throughout the workplace.
Atmospheric Contaminants – Whether in the form of airborne particles or gaseous substances that could be harmful to the human eye, adequate protection should be provided against atmospheric contaminants in workplaces where they may be present. The concentration of contaminants should be constantly monitored and wherever they are present, workers should have access to eyewash and face wash stations. These stations should be able to supply a continuous flow of clean water for up to 20 minutes, in order to dilute any chemicals that enter the eye and to flush out any foreign objects that may be present.
Installing WHS approved eye and face wash stations is of vital importance but this is just the first step that needs to be taken to protect those who work in potentially hazardous conditions. Employers also need to provide workers with comprehensive training in the use of these stations, to make sure that they can take immediate action as soon as necessary. Speed is key when dealing with eye injuries: every second counts and treatment should therefore be administered without delay.
Every eye and face wash station should be tested and serviced on a regular basis to ensure that it is in excellent working order. If this is found not to be the case, maintenance and repair work should be performed immediately. Technicians responsible for such work should be fully qualified and servicing schedules should be in compliance with the latest WHS regulations. Contact us for eye wash station solutions.